Skip to main content
Loading…
This section is included in your selections.

The preliminary plat should show the following information:

A. Name of the subdivision;

B. Legal description of location, and total area in acres or fractional part thereof, of the proposed subdivision;

C. Name and address of owner and subdivider and name of engineer or land surveyor of the preliminary plat;

D. The horizontal scale shall be 100 feet or less to the inch;

E. Date and north point;

F. The locations, width and names of all existing or platted streets or other public ways within or adjacent to the tract, and roads within 100 feet of the tract, existing permanent buildings, railroad rights-of-way and other important features, such as section lines, political subdivision or corporation lines, and school district boundaries;

G. All parcels of land intended to be dedicated for public use or reserved in the deeds for the uses of all property owners in the proposed subdivision, together with the purpose or conditions or limitations of such reservations, if any;

H. The layout, numbers and approximate dimensions of proposed lots;

I. The location, names, width of proposed streets, alleys and existing and proposed easements within the subdivision;

J. Space for approval of the commission, with additional space for date and seal;

K. Existing sewers, water mains, culverts, or other underground structures within the tract and immediately adjacent thereto, with pipe sizes, grades and locations indicated; existing pole lines should also be shown;

L. The names of adjacent recorded subdivisions, and owners of adjacent land not subdivided, giving book and page where recorded;

M. The commission may waive the following at its discretion: profiles, and accompanying data. (Ord. 152 § 1, 1971; 1978 code § 15.104)